Products

  • Pigtail Multi Mode OM1

    Multi Mode OM1 pigtails

    • LC/SC/ST/FC
    • UPC
    • 1m, 2m lengths
    • Grey colour
    • Other colours and lengths on request

    Part nr.:

  • Pigtail Multi Mode OM2

    Multi Mode OM2 pigtails in 1m length, white. UPC connector LC/SC/ST/FC. Other colours and lengths on request

    • LC/SC/ST/FC
    • UPC
    • 1m, 2m lengths
    • Orange colour
    • Other colours and lengths on reques

    Part nr.:

  • Patchcords Single Mode OS2

    Single Mode 9/125 OS2 patchcords

    • LC, SC, ST, FC connectors
    • E2000, MTRJ, MU connectors
    • UPC and APC available
    • LSZH jacket
    • Yellow colour

    Part nr.:

  • Patchcords Multi Mode OM1

    Multi Mode 62.5/125 OM1 patchcords

    • LC, SC, ST, FC connectors
    • E2000, MTRJ, MU connectors
    • UPC 
    • LSZH jacket
    • Orange colour

    Part nr.:

  • Patchcords Multi Mode OM2

    Multi Mode 50/125 OM2 patchcords

    • LC, SC, ST, FC connectors
    • E2000, MTRJ, MU connectors
    • UPC 
    • LSZH jacket
    • Orange colour

    Part nr.:

  • Patchcords Multi Mode OM3

    Multi Mode 50/125 OM3 patchcords

    • LC, SC, ST, FC connectors
    • E2000, MTRJ, MU connectors
    • UPC 
    • LSZH jacket
    • Aqua colour

    Part nr.:

  • Patchcords Multi Mode OM4

    Multi Mode 50/125 OM4 patchcords

    • LC, SC, ST, FC connectors
    • E2000, MTRJ, MU connectors
    • UPC 
    • LSZH jacket
    • Erika Violet colour

    Part nr.:

  • Introduction to Nek 700 series

    This course covers the contents of relevant standards, providing participants with the knowledge they need to select correct communication categories, equipment and materials, and to make qualitatively correct installations. The course also covers applicable requirements to documenting and testing communications networks.

    Target group: 

    Electrical personnel who work with electronic communications networks covered by the Norwegian Communications Authority (Nkom) authorization regulations. The course modules cover all types of installations including broadband networks, cabling in buildings and special applications on vessels and offshore.

    Duration: 1 day

    Part nr.:

  • Course in fibre optic test equipments

    Fiber Optics Testing: Troubleshooting, Verification, and Certification

    Fiber optic testers include tools and equipment to perform basic inspection and cleaning, basic troubleshooting and verification testers, certification testers, and advanced OTDR testers for troubleshooting and analysis of existing fiber optic cabling.

    We tailor the course according to customer needs within fiber and Category cable Cat6/6A - Cat7/7A.We can also look at specialization in testing instruments like Lantek, Fluke, Anritzu. Larger groups from the same company are welcome to contact us for a fixed price.

    Duration: 3-4 hours 

    Part nr.:

  • Draka QANI-CI Cca R01 Fire Resistant fiber optic cable

    This cable can be used for LAN and WAN backbones, telecom access lines, fibre to business, fibre to the building drop connections and tunnels/galleries; as well as fibre to the home drop and access connections. With its FireRes® sheathing this cable is ideal for indoor installations. It is CPR Class Cca cable with high flame retardant and high fire-resistant performances. The cable with corrugated steel tape armouring is rodent proof. The cable is well suited for installation in ducts and on trays indoor and shorter outdoor applications. Can be used in tunnels in accordance to cable class 3 in NEK601 (11.6.3)

    Part nr.:

  • 60111463

    Draka UC900 Flex Cat7 S/FTP AWG26/7 PUR, Red

    Cat7 S/FTP flexible patchcable with PUR sheath. Ideal for making patch cables or other use in work areas.

    • Red
    • AWG 26/7
    • PUR

    Part nr.: 60111463

  • 9MGF009103

    Fire Resistant Cat7 S/FTP DNV approved LSZH-SHF2

    Fire resistant Cat7 S/FTP cable for use as installation/horizontal cable in tougher electrical and mechanical environment, including ships and offshore units where transmission during fire is critical.

    • Fire Resistant
    • Red
    • DNV 
    • SHF2 sheath
    • UV protection
    • AWG 23/1

    Part nr.: 9MGF009103

  • BC-10-001

    Bergen Cabling Maritime LAN Cat7 S/FTP DNV approved cable with SHF1 sheath

    Cat7 DNV certified cable meant for use as installation/horizontal cable in tougher electrical and mechanical environment, including ships and offshore units. Also available on 2000m drums (Part number BC-10-001-2K)

    • 500m drums
    • 2000m drums
    • DNV approved
    • BV approved
    • Flame retardant
    • Halogen free
    • SHF1 sheath
    • UV protection

    Part nr.: BC-10-001

  • BC-10-003

    Bergen Cabling Maritime LAN hybrid cable Cat7+2SM fibres, SHF1 sheath

    DNV GL certified hybrid cable with both Cat7 and 2x Bend Bright single mode fibers in one cable. For use in tougher electrical and mechanical environment, including ships and offshore units

    Part nr.: BC-10-003

  • BC-10-004

    Bergen Cabling Maritime LAN hybrid cable Cat7+2SM fibres, SHF1 and MUD sheath

    DNV GL certified hybrid cable with both Cat7 and 2x Bend Bright single mode fibers in one cable. The cable has an additional fire retardant, halogen-free low smoke MUD protected outer sheath.For use in tougher electrical and mechanical environment, including ships and offshore units

    • Bend Bright fiber
    • 500m drums
    • Extra MUD sheath
    • Flame retardant
    • Halogen free

    Part nr.: BC-10-004

  • BC-10-005

    Bergen Cabling Maritime LAN Cat7 cable with SHF1 and MUD sheath

    Cat7 DNV GL certified cable meant for use as installation/horizontal cable in tougher electrical and mechanical environment, including ships and offshore units. The cable has an additional fire retardant, halogen-free low smoke MUD protected outer sheath

    • 500m drums
    • Extra MUD sheath
    • Flame retardant
    • Halogen free
    • CPR Eca

    Part nr.: BC-10-005

  • BC-10-021

    Bergen Cabling Maritime LAN Cat6A S/FTP DNV approved cable with SHF1 sheath

    Cat6A DNV certified cable meant for use as installation/horizontal cable in tougher electrical and mechanical environment, including ships and offshore units

    • Cat6a 500 MHz
    • 10Gbit
    • 500m drums
    • LSOH-FR
    • DNV approved
    • Elnr: 1000800
    • Eqhub: 100000300

    Part nr.: BC-10-021

  • BC-10-025

    Bergen Cabling DNV approved Maritime LAN S/FTP Cat6A stranded cable

    Cat6A S/FTP DNV approved cable meant for use as installation/horizontal cable in tougher electrical and mechanical environment, including ships and offshore units. Stranded version.

    • Cat6a 500 MHz
    • Stranded (23/7)
    • 10Gbit
    • 500m drums
    • LSOH-FR
    • DNV approved

    Part nr.: BC-10-025

  • BC-11-004

    Bergen Cabling Maritime LAN Connector Cat6A STP DNV, Keystone

    Cat6a DNV certified connector for applications up to 10 Gbit. Can be used with Bergen Cabling Maritime LAN patchpanels and outlets. Also suitable for use with other vendors with keystone footprint

    This is now replaced by BC-11-006

    Part nr.: BC-11-004

  • BC-11-005

    Bergen Cabling Toolless Cat6a Male Connector

    Fully screened Cat.6A male connector RJ 45 for communication up to 500 MHz, 100 Ω. The connector can be used with the Maritime LAN Cat.6A cable for field terminations. The connector is made for application up to 10 Gigabit Ethernet on solid and stranded wires, and shall be handled according to installation manual.

    • 10Gbit
    • AWG 23-26
    • Max cable OD 7.8mm -/+ 0.2mm

    Part nr.: BC-11-005

  • BC-11-006

    Bergen Cabling Maritime LAN Cat6A STP Connector, Keystone v2, DNV

    Fully screened Cat6A connector RJ45 for communication up to 500 MHz, 100 Ω. The connector can be used with the Maritime LAN 24 port Patchpanel and outlets fits for the connector in a Cat6A installation, or keystone interface from other vendors. The connector is made for application up to 10 Gigabit Ethernet on solid wires, and shall be handled according to installation manual and together with the tool for the connector. This connector replaces the BC-11-004.

    • 10 Gbit
    • Cat6a 500MHz
    • 22 - 24 AWG, solid wire
    • 22 - 26 AWG, stranded wire

    Part nr.: BC-11-006

  • BC-12-021

    BC Maritime Outlet IP67 w/1x Cat6a

    IP67 outlet for harsh environments. For use with our IP67/IP20 patchcords

    • Cat6a
    • IP67

    Part nr.: BC-12-021

  • BC-12-024

    BC Maritime Outlet IP67 w/2xCat6a

    IP67 outlet for harsh environments. For use with our IP67/IP20 patchcords

    • Cat6a
    • IP67

    Part nr.: BC-12-024

  • BC-12-201

    BC Outlet 1xJ45 STP Cat6A RS, Keystone

    Flush mount outlet with 1xCat6a keystone connector and Elko RS16 frame.

    Part nr.: BC-12-201

  • BC-12-202

    BC Outlet 2xJ45 STP Cat6A RS, Keystone

    Flush mount outlet with 2xCat6a keystone connectors and Elko RS16 frame.

    Part nr.: BC-12-202

  • BC-12-203

    BC Outlet 1xJ45 STP Cat6A RS Angled, Keystone

    Angled outlet with 1xCat6a keystone connector and Elko RS16 frame. Center plate is mounted with screw to ensure that it is properly fastened. Especially for use in maritime environment

    Part nr.: BC-12-203

  • BC-12-204

    BC Outlet 2xJ45 STP Cat6A RS Angled, Keystone

    Angled outlet with 2xCat6a keystone connector and Elko RS16 frame. Center plate is mounted with screw to ensure that it is properly fastened. Especially for use in maritime environment

    Part nr.: BC-12-204

  • BC-12-207

    BC Outlet 1xJ45 STP Cat6A TEK, Keystone

    TEK outlet with 1xCat6a keystone connector. Boxless type for use with TEK/INKA trunking

    Part nr.: BC-12-207

  • BC-12-208

    BC Outlet 2xJ45 STP Cat6A TEK, Keystone

    TEK outlet with 2xCat6a keystone connectors. Boxless type for use with TEK/INKA trunking

    Part nr.: BC-12-208

  • BC-12-212

    BC Outlet 1xSTP Cat6A DIN, Keystone

    DIN mount outlet with 1xCat6a keystone DNV approved connector. Complete with dust cap and side cover

    Part nr.: BC-12-212

  • BC-12-220

    BC IP55 Wall Outlet for Keystone, empty

    • IP55 rated

    • IK06 impact rated
    • Single or double Cat6a RJ45

    • Colour: Dark grey (RAL 7016)

    Part nr.: BC-12-220

  • BC-12-221

    BC Wall box IP66 for 2xCat6a STP keystone, empty

    • IP66 rated even with patchcords attached (lid fastened with screw)
    • Single or double Cat6a keystone connector (BC-11-004/BC-11-006)
    • Produced in halogen free and 100% recycled materials

    Part nr.: BC-12-221

  • BC-12-236

    BC Outlet 1xRJ45 STP Cat6A + Duplex LC 9/125

    Outlet for use with the hybrid cable. Comes with Cat6a connector and LC Duplex adapter.

    • Hybrid Outlet
    • Cat6a + LC

    Part nr.: BC-12-236

  • BC-12-253

    BC Outlet 1xRJ45 STP Cat6A RS Angled, Keystone w/wallbox

    Angled outlet with 1xCat6a keystone connector, Elko RS16 frame and 33mm backbox. Center plate is mounted with screw to ensure that it is properly fastened. Especially for use in maritime environment

    Part nr.: BC-12-253

  • BC-12-254

    BC Outlet 2xRJ45 STP Cat6A RS Angled, Keystone w/wallbox

    Angled outlet with 2xCat6a keystone connectors, Elko RS16 frame and 33mm backbox. Center plate is mounted with screw to ensure that it is properly fastened. Especially for use in maritime environment

    Part nr.: BC-12-254

  • BC-13-010

    Patchpanel BNC 20p 75 ohm Bergen Cabling Maritime, empty

    Heavy duty BNC solution for maritime and offshore installations. Suitable for BNC 75 ohm adapters with plastic rings for insulation (if needed)

    Part nr.: BC-13-010

  • BC-13-020

    Patchpanel XLR 16p Bergen Cabling Maritime, empty

    Heavy duty XLR solution for maritime and offshore installations. Suitable for XLR adapters and other adapters with same form factor.

    Part nr.: BC-13-020

  • BC-13-071

    BC Patchpanel 1U 24p LC Duplex AISI 316L

    Heavy duty fibre optic panel made of stainless steel. Loaded with LC SM duplex adapters

    Part nr.: BC-13-071

  • BC-13-101

    BC Wallbox Lockable LC SM for 36 DX adapters, SS316L, empty

    Lockable wallbox made of acid free stainless steel. Suitable for up to 36 LC duplex or 36 SC simplex adapters.

    Part nr.: BC-13-101

  • BC-13-201

    Bergen Cabling Maritime LAN patchpanel 24p, Keystone, empty

    Heavy duty acid free stainless steel Maritime LAN patchpanel for BC Cat6a keystone connectors. Also suitable for other keystone adapters (e.g. LC, HDMI, USB etc).

    Part nr.: BC-13-201

  • BC-13-203

    Bergen Cabling Maritime LAN patchpanel 24p black, Keystone, empty

    Heavy duty stainless steel Maritime LAN black patchpanel for BC Cat6a keystone connectors. Also suitable for other keystone adapters (e.g. LC, HDMI, USB etc).

    Part nr.: BC-13-203

  • BC-13-205

    BC Hybrid panel Stainless steel 1U for fiber field termination

    BC Hybrid panel 1U comes with 12xCat6a BC-11-004 connectors and 12xLC SM duplex adaptors. This version is for field termination with Unicam connectors as an option.

    Part nr.: BC-13-205

  • BC-13-206

    BC Hybrid panel Stainless steel 2U for fiber field termination

    BC Hybrid panel 2U comes with 24xCat6a BC-11-004 connectors and 24xLC SM duplex adaptors. This version is for field termination with Unicam connectors as an option.

    Part nr.: BC-13-206

  • BC-13-207

    BC Hybrid panel Stainless steel 2 HU, empty

    BC Hybrid panel 1U comes with 12xCat6a BC-11-004 connectors and 12xLC SM duplex adaptors. This version is for fusion splicing with LC SM pigtails as an option.

    Part nr.: BC-13-207

  • BC-13-208

    BC Hybrid panel Stainless steel 2 HU, fully equipped

    BC Hybrid panel 2U comes with 24xCat6a BC-11-004 connectors and 24xLC SM duplex adaptors. his version is for fusion splicing with LC SM pigtails as an option.

    Part nr.: BC-13-208

  • BC-13-234-7

    BC Alu patchboks 4-12 port w/Cat6A Keystone

    Patchbox in aluminium for use on e.g. shelfs, wall etc. 4, 8 and 12 ports available. Comes complete with BC Cat6a keystone connectors

    Part nr.: BC-13-234-7

  • BC-14-201

    Bergen Cabling Keystone Termination Tool

    Termination tool for BC Cat6a keystone connectors

    Part nr.: BC-14-201

  • BC-15-xxx

    BC Patchcord Cat6A UTP LSOH-FR White

    BC Patchcords Cat6a UTP white. Low smoke halogen free and flame retardant. Standard lengths 0.2m to 20m

    Part nr.: BC-15-xxx

  • BC-16-1xx

    BC Slim Patchcord Cat6A FTP LSOH

    BC Slim Patchcords Cat6A FTP. low smoke halogen free. Standard lengths 0.2m to 20m. Standard colour is grey, but other colours may be available on request.

    Bergen Cabling Cat6a FTP slim patchcords are designed for high density environments such as data centers and telecommunication rooms. The outer diameter is 40% reduced compared to traditional patchcords thus saving space in e.g. a rack.

    Part nr.: BC-16-1xx

  • BC-16-xxx

    BC Patchcord Cat6A S/FTP LSOH-FR Grey

    BC Patchcords Cat6a S/FTP grey. Low smoke halogen free and flame retardant. Standard lengths 0.2m to 20m. Also available in some lengths of blue and red

    • AWG26/7

    Part nr.: BC-16-xxx

  • BC-17-xxx

    BC Maritime Patchcord IP67/IP20 Cat6a

    BC Maritime Patchcords IP67 Cat6a IP67 and IP20. For use with BC-12-021/024. May be used with outdoor APs and CCTV.

    Part nr.: BC-17-xxx

  • BC-20-xxx

    BC Voice cord 1 pair RJ45-RJ45/IDC solid core LSOH-FR

    BC Voice cords with either RJ45-RJ45 or RJ45-IDC. Low smoke halogen free and flame retardant. For use with digital PABX system.

    Part nr.: BC-20-xxx

  • BC-21-xxx

    BC Patchcord Cat6 FTP Waterproof

    BC Waterproof Patchcords Cat6 FTP black. Lengths from 5m-25m.

    Part nr.: BC-21-xxx

  • BC-31-xxx

    LC-LC Duplex 9/125 Armoured & Waterproof

    BC Fiber Optic Waterproof and Armoured Patchcords. LC SM Duplex from 0.5m-20m.

    Part nr.: BC-31-xxx

  • BC-41-0xx

    Bergen Cabling Maritime LAN AICI fiber

    Fiber optic DNV approved cable for industrial, offshore and maritime environments. Suitable for both indoor and outdoor installation. The outer sheath is made from black UV-stabilized and weather resistant material which is SHF1 classified and may be exposed for shorter periods to fluids such as diesel and mineral oils.

    • Tight buffer
    • Steel wire braiding
    • Indoor and outdoor
    • LSOH-FR
    • DNV approved
    • Flame retardant
    • Halogen free

    Part nr.: BC-41-0xx

  • CAT3LSA25-C

    Patchpanel 1U Cat3 25 ports LSA Optronics

    Patchpanel Cat3 for voice. 25 pairs.

    Part nr.: CAT3LSA25-C

  • CAT3LSA50-C

    Patchpanel 1U Cat3 50 ports LSA Optronics

    Patchpanel Cat3 for voice. 50 pairs.

    Part nr.: CAT3LSA50-C

  • HIK-DS-2DT6223-AELY

    Hikvision IP PTZ 2MP Anti-Corrosion Camera

    Hikvision Anti-Corrosion series smart PTZ Dome Camera is able to effectively avoid acidic and neutral salt fog corrosion.IP67

    Part nr.: HIK-DS-2DT6223-AELY

  • HIK-LDS-2CD6626B

    Hikvision IP Box 2MP Anti-Corrosion Camera

    Hikvision Anti-Corrosion series Box Camera is able to effectively avoid acidic and neutral salt fog corrosion. IP67

    Part nr.: HIK-LDS-2CD6626B

  • KURSFIBER

    Basic fiber Optic Training Course

    This course is for anyone involved in fiber optic communications from specifying and designing to actual installation. It has been designed to ensure that the student understands the emerging and ever increasing market for fiber optic communications, how fiber transmission 'works' and all the components involved.

    The goal for this course is that the participants will get the knowledge they need to select correct equipment and materials and get a basic knowledge of fiber optic cables both single and multimode and the different areas for these to be used. We will also focus on the testing and documentation needed after completing a job.

    Duration: 2 days

    Part nr.: KURSFIBER

  • PIGTAIL-OM3

    Pigtail Multi Mode OM3

    Multi Mode OM3 pigtails in 1m length, white. UPC connector LC/SC/ST/FC. Other colours and lengths on request

    Part nr.: PIGTAIL-OM3

  • PIGTAIL-OM4

    Pigtail Multi Mode OM4

    Multi Mode OM4 pigtails in 1m length, white. UPC connector LC/SC/ST/FC. Other colours and lengths on request

    Part nr.: PIGTAIL-OM4

  • PIGTAIL-SM

    Pigtail Single Mode OS1/OS2

    Single Mode OS1/OS2 pigtails, white. UPC connector LC/SC/ST/FC/E2000. APC, other colours and lengths on request

    Part nr.: PIGTAIL-SM

  • QFCIMUDxxxxx

    QFCI fire resistant cable for offshore, MUD

    Optical cable for indoor and outdoor use in vital communication and emergency systems that need to be operational during fire. Outer MUD sheath

    Part nr.: QFCIMUDxxxxx

  • QFCIxxxxx

    QFCI fire resistant cable for offshore

    Optical cable for indoor and outdoor use in vital communication and emergency systems that need to be operational during fire

    • DNV GL approved
    • Fire resistant
    • Flame retardant
    • Halogen-free
    • Loose tube
    • Indoor and outdoor

    Part nr.: QFCIxxxxx

  • S01FCxxx

    Patchpanel 1U 24ports FC

    Fiber optic sliding patchpanel with for up to 24 FC Single Mode or Multi Mode adaptors, black

    Part nr.: S01FCxxx

  • S01STxxx

    Patchpanel 1U 24ports ST

    Fiber optic sliding patchpanel with for up to 24 ST Single Mode or Multi Mode adaptors, black.

    Part nr.: S01STxxx

  • S03LCxxx

    Patchpanel 1U 24ports LC

    Fiber optic sliding patchpanel with for up to 24 LC duplex Single Mode or Multi Mode adaptors, black

    Part nr.: S03LCxxx

  • S09SCxxx

    Patchpanel 1U 24ports SC

    Fiber optic sliding patchpanel with for up to 24 SC duplex Single Mode or Multi Mode adaptors, black

    Part nr.: S09SCxxx

  • SO-HU40-383815-xx

    Hook-up junction box with Gisma 40

    Hook-up junction box with Gisma 40 titanium receptacle, outdoor Exe approved for Zone 2.

    Part nr.: SO-HU40-383815-xx

  • SO-HU40-xx

    Hook-up cable with Gisma 40

    Hook-up cable with Gisma 40 titanium plug for outdoor use.The cable used is a military tactical cable for extreme strengths.

    Part nr.: SO-HU40-xx

  • SO-JBMC

    Junction Box ST MM Ex barrier fibre in/out

    Junction box with fibre optic barrier (multimode) for use offshore in Ex areas.

    Part nr.: SO-JBMC

  • SPLICE45CLEAR, SPLICE60CLEAR

    Splice protectors for optical fusion splicing

    Splice protectors designed to maintain the strength & environmental stability of optical fiber cables after fusion splicing.

    • 45mm and 60mm


    Part nr.: SPLICE45CLEAR, SPLICE60CLEAR

  • SPT01

    SPT01 Speedway Fiber Splice Tray for 24 fibers

    Introducing the Speedway splice tray with unrivaled ease of use and flexibility. Featuring a unique external fiber pathway and pivoting splice holder arrangement this tray redefines the concept of splice management, combining fiber management and splicing control in one product. Due to its accommodating internal dimensions the Speedway splice tray is able to comfortably hold 24 splices with heatshrink style splice protectors with up to 900μm buffered fibers.


    Part nr.: SPT01

  • SPT03

    SPT03 Splice tray kit for 12 heat shrink splices, black with lid

    This kit includes a splice tray that offers protection for up to 12 heat shrink splices, lid and splice holders. The tray ensures the minimum bend radius is protected and has multiple cable entry points.

    Part nr.: SPT03

Contact Us!

Do you have any questions about our products or services, please send us a message here, or you can call us at +47 55 31 27 00